Add this 3-Jaw chuck to your 4th Axis Rotary table to enable mounting of the work piece. Jaw diameter of 80mm.

Price: £95.00  exc VAT

Quantity 1 2 3 4 5

The “LaserProbe4500” system is intended for the non-contact laser scanning of items, with the purpose of obtaining three-dimensional computer models and files that can be further used in CNC machining. The output can be in the form of STL, DXF and TXT files.

The probe is attached to the Heiz machine and is passed over the surface of the item to iteratively scan the object...

Price: £1,500.00  exc VAT

Quantity 1 2 3 4 5

This diamond engraving tool enables you to carve out fine detail with a diamond cutting stone. The tool holds the diamond in a vertical position, with cutting depth finely adjustable using the tools depth setting and spring mount.

Price: £110.00  exc VAT

Quantity 1 2 3 4 5

This accessory provides a consistent depth control when milling/engraving. The pressure is regulated by means of a spring, with engraving/milling depth finely adjustable in the order of hundredths of a millimetre by adjusting the teflon-coated nose cone, which aslo ensures smooth gliding over materials without scratching their surfaces. This depth limiting control unit comes with a linear ra...

Price: £225.00  exc VAT

Quantity 1 2 3 4 5

GranitoGrav photo engraving system for granite and glass. The same eay to use system whether working on gravestones, tiles, glass, mirror glass... Supply your colour or black-and-white image, and select the size of the desired engraved image. No programming knowledge is necessary!

The consumption costs are extremely low. Tooling costs of a few pounds per tool, each lasting about 3-5...

Price: £3,775.00  exc VAT

Quantity 1 2 3 4 5

Add this 4th Rotary Axis and mill 360? 3D parts. Highest quality, high-precision worm-gear with a stopping moment of over 20Nm.

Because of its exisitng 7mm drill-hole, the rotation table can be clamped horizontally as well as vertically, providing great flexibility in setup.

Note: The 4th Axis Rotary Table requires either Win PCNC Economy or Professional Edit...

Price: £900.00  exc VAT

Quantity 1 2 3 4 5

Spray cooling device for small compressors. Requires approx 2 bar pressure.

Price: £125.00  exc VAT

Quantity 1 2 3 4 5

The Kress spindle comes with a collet nut to hold the collet and attach to the kress spindle by screwing on. Although the supplied collet nut is adequate on its own, switching the collets and tooling can be speeded up further by using additional collet nuts to hold the other collets and the corresponding tooling. Just screw off the currrent collet/net pair and screw on the other collet/nut p...

Price: £15.00  exc VAT

Quantity 1 2 3 4 5

The Kress spindle comes with an 8mm collet for tool attachmnet as standard. These additional collets support a wider range of tool shaft diameters covering both metirc and imperial measurements.

From: £20.00  exc VAT

The Kress spindle comes with an 8mm collet for tool attachmnet as standard. These additional collets support a wider range of tool shaft diameters of 3mm, 1/8", 6mm and 1/4" respectively, enabling use of the more common smaller series tools covering both metirc and imperial measurements.

Price: £80.00  exc VAT

Quantity 1 2 3 4 5

• 1050 W Power Output
• 5,000 to 25,000 rpm selectable on rotary dial
• Slim design for improved ergonomics
• Solid shaft electronic control for constant speed
• Gentle start and current surge limitation
• Motor protected against dust and particle ingress
• Steel engine flange with double stocking for higher milling forces
• Spindl...

  Price: £130.00  exc VAT

  Quantity 1 2 3 4 5

This table vice fits across the T-groove plates to provide a low profile (30mm height) table vice with double moving jaws - your work is always centred in the vice. Comes with M6 bolts and T-Groove nuts, ready for use with the T-Groove plates.

Suitable for the 720 machine model and upwards.

Price: £95.00  exc VAT

Quantity 1 2 3 4 5

This table vice fits across the T-groove plates to provide a low profile (20mm height) table vice with double moving jaws - your work is always centred in the vice! Can hold items with both straight edges and cylindrical shapes (using the supplied 6mm diameter metal dowel pegs). Comes with M6 bolts and T-Groove nuts, ready for use with the T-Groove plates.

Suitable for the 400 machin...

Price: £75.00  exc VAT

Quantity 1 2 3 4 5

VHM Milling bit for aluminum, perspex, brass. 3mm diameter cutter with 1/8" diameter shaft.

Price: £12.00  exc VAT

Quantity 1 2 3 4 5

Set of 10 solid carbide milling bits of various sizes, suitable for various materials. With 1/8" diameter shafts.

1 x End Mill, 2mm diameter, Single-flute (finishing, plastics, woods, light metals)

1 x End Mill, 2mm diameter, 2-flute (finishing, plastics, woods, light metals)

1 x End Mill, 3mm diameter, 2-flute (finishing, plastics, woods, light metals)...

Price: £100.00  exc VAT

Quantity 1 2 3 4 5

Milling bit with diamond pattern cutter for MDF, particle boards and carbon fibre. 1/8" diameter shaft.

Price: £10.00  exc VAT

Quantity 1 2 3 4 5

Cut thick materials like card, flock, foils etc with precision.

Price: £975.00  exc VAT

Quantity 1 2 3 4 5

A protective cabinet for the Heiz machines. Constructed from extruded aluminium sections with perspex sides and sliding front doors. The doors can be flexed in and out of the frame to allow better access if required.

Cabinet can be completely lifted on/off, over the machine, resting on the bench that the machine sits on - this enables you to have full access for easy cleaning, withou...

From: £275.00  exc VAT

Add this custom made Tailstock to your 4th Axis Rotary table purchase to enable mounting of longer work pieces. Provides rotating support at far end of workpiece. Incorporates housed bearings for smooth rotation.

Price: £95.00  exc VAT

Quantity 1 2 3 4 5

A steel pinch clamp suitable for use on the Heiz CNC machine T-Groove plates. The clamps have a slot of 7mm diameter, running up the middle of the clamp to enable easy re-adjustment before tightening. A set of 4 of clamps will cover most requirements for clamping work to the t-groove table. Pricing is per single clamp.

Price: £6.00  exc VAT

Quantity 1 2 3 4 5

This versatile M6 threaded clamping nut set is used to mount the T-Groove plates and also to clamp items to the t-groove plate itself and sides of the machine frame. 10 nut/bolt pairs per pack.

Price: £14.00  exc VAT

Quantity 1 2 3 4 5

Precision anodised aluminium T-Groove plates to use as machine bed and clamping plates. Can be added/removed easily for flexibility. Comes in 2-3 plate sections, depending on machine size, with plates cut to the overall length of the machine.

From: £85.00  exc VAT

 Cut thick materials like card, flock, foils etc with precision.

Price: £775.00  exc VAT

Quantity 1 2 3 4 5

This dust and waterproof tool length sensor provides the facility for automatic tool length measurement. Simply plug in the sensor (to the port on the Heiz CNC machine), place it on your workpiece or table and run the 'block Zero-point Z' measurement function via WinPC-NC jog control. The tool is then slowly moved down until it touches the sensor, with the new tool length automatically calc...

Price: £175.00  exc VAT

Quantity 1 2 3 4 5

Enhanced Capability and Flexibility with CNC Turning Adaption Kit

Convert your Heiz CNC Machine into a wood/plastic turning machine in a matter of a few minutes.

Add this additional capability to your mutipurpose Heiz CNC Machine and take advantage of turning up to approx. 500 mm length and approx. 70 mm diameter. Simply define an outline profile using your C...

From: £745.00  exc VAT

This attachment enables you to connect a standard vacuum cleaner hose for swarf & dust extraction. Keeps the work area clean and free from swarf and debris, saving you time spent on cleaning activities. Attachment fits to Heiz machines via pre-existing location points in the Kress Spindle holder.

Price: £80.00  exc VAT

Quantity 1 2 3 4 5

Vacuum table suited to holding down sheet material quickly and easily. Ideal for engraving and PCB milling. Hosing and adaptor supplied to fit standard vacuum hoses. Size, approx. 1000x600x34mm.

Price: £275.00  exc VAT

Quantity 1 2 3 4 5

Vacuum table suited to holding down sheet material quickly and easily. Ideal for engraving and PCB milling. Hosing and adaptor supplied to fit standard vacuum hoses. Size, approx. 300x450x34mm.

Price: £140.00  exc VAT

Quantity 1 2 3 4 5

Vacuum table suited to holding down sheet material quickly and easily. Ideal for engraving and PCB milling. Hosing and adaptor supplied to fit standard vacuum hoses. Size, approx A3, 400x700x34mm.

Price: £200.00  exc VAT

Quantity 1 2 3 4 5

This Vinyl/Foil cutting tool enables you to cut out signart and produce professional labels for your products. The cutter holds a small knife blade, with pressure regulated via a coil, which in case of deeper Z-traverse paths increases pressure on the knife holder. The knife is housed in a double ball bearing for somooth, precise operation. Suitable for knifes with 45, 60 or 70° angl...

Price: £110.00  exc VAT

Quantity 1 2 3 4 5