Steel Pinch Clamp with 7mm Slot and M6 Thread

Steel Pinch Clamp with 7mm Slot and M6 Thread

A steel pinch clamp suitable for use on the High-Z CNC machine T-Groove plates. The clamps have a slot of 7 mm diameter, running up the middle of the clamp to enable easy re-adjustment before tightening.

The clamps are generally used in conjunction with the T-Groove nut accessory, which provides a bolting location along the T-Groove slot. An M6 threaded through hole is also provided at the end of the clamp to enable end support with suitable length bolt (see image below for example usage on T-Groove bed).

Overall dimensions are 50 mm x 20 mm. Pricing is per single clamp. A set of 4-6 clamps will cover most requirements for a single setup on the smaller machines. A set of 8-12 for the larger machines.

  • £7.50
  • exc VAT
Qty:  

Product questions

  • Paul Menzies
    29-04-2020, 08:55

    Can you please confirm if the M6 threaded hole goes through the clamp and the overall dimensions.

    Thanks,
    Paul

    Administrator
    29-04-2020, 09:53

    The overall dimensions are 50 mm x 20 mm. The M6 threaded hole is a through hole.

Customers who bought this product also bought
Drop items here to shop
Product has been added to your cart