A steel pinch clamp suitable for use on the High-Z CNC machine T-Groove plates. The clamps have a slot of 7 mm diameter, running up the middle of the clamp to enable easy re-adjustment before tightening.
The clamps are generally used in conjunction with the T-Groove nut accessory, which provides a bolting location along the T-Groove slot. An M6 threaded through hole is also provided at the end of the clamp to enable end support with suitable length bolt (see image below for example usage on T-Groove bed).
Overall dimensions are 50 mm x 20 mm. Pricing is per single clamp. A set of 4-6 clamps will cover most requirements for a single setup on the smaller machines. A set of 8-12 for the larger machines.